It is now time to hang your flat screen TV. You may have put it off for years or had it done by someone else. But now that you are moving, it is your turn. If you feel too intimidated to hang a flat screen, don’t.
How to Install a TV Wall Mount
If you are hesitant, you don’t have to hang the TV by yourself. Find a friend who has done it before and convince them to help. Hire someone who will do the job right. No matter what you do, you shouldn’t attempt this job if it isn’t something you enjoy doing. You never know when your child will be watching the television. These scenarios are avoidable if you learn how professionals tv installation in auckland.
How to Choose the Right Tools
What tools will you need if you decide to do the job?
- Tape measure
- A drill and bits
- A bit or screwdriver for a screwdriver.
- Niveau
- Pencil
- Stud finder (optional)
Step 1: Locate the Stud and Mount
First, find a safe place to hang your television. Find the studs to do this. There are many ways to locate studs. You can find an outlet in the floor, measure 16 inches and then look for a stud. A stud finder is another option. The stud finder can be quite inexpensive and will work well if you take your time. To ensure that you have found a true stud, ensure you are not too obvious when it tells you. You can also use drywall toggles if all else fails. You must ensure that toggles are built to withstand the entire weight of the TV and frame. You must also ensure that the drywall can bear the weight. When you stand in front of the TV, the height of the frame should be at eye level with the middle of its screen. Make new holes in your bracket if the studs do not line up with the holes in the bracket. It is usually not difficult and is much better than missing bolts that attach the mounting frame to a wall. Four bolts are required for most mounting frames. These bolts will need first to be drilled. Take it slow, and you will get the job done. However, if things are slightly off-level there will be solutions later. You are not to be off-level!
Step 2: Run Wires through the Wall
Once the frame has been hung, place the wires into the wall. Make sure that the cables are approved to be installed in walls. If they are unsure if the wires are safe to install in walls or if they aren’t suitable, they can purchase channeling that can easily be painted and runs from the outlet to the TV. Another option is to have someone come in to run a new outlet to the area behind your television. This will make it impossible to see.
Step 3: Mount Your TV
After the frame is installed, place the TV on the frame. This is usually easy, but it may take effort to align the pieces correctly. It’s best to have someone help you. It is not pleasant to think of a TV falling on someone or breaking. If the television isn’t level after hanging it, grab the top side of the TV and pull down. Pretty ingenious, huh? This can help you to levelize the frame if you make sure you put it in studs. Another option is to loosen or tighten one of the bolts on the back side of your frame. You may need to remove bolts from the back and retry the process. This can be tedious so take your time and do it slowly. A television is a smart thing to hang. Viewing the TV when it is hung and saves space is easier. Hang your TV if you feel comfortable. The results will be pleasing.
Be the first to write a comment.