The roof painting task is a little difficult. You may need to work as an expert. You also need access to proper tools and kits. You must be able to access the roof easily. The task will take time, so you have to consider using safety kits.

It is possible to perform DIY painting tasks if you follow the guidelines provided by an expert team. You can also search around for the best roof painting in Auckland team. If you need the best results, then it is best to hire an expert roof painting service.

You can still take care of small repairs and painting tasks on your own. You just have to ensure that you observe full safety at the worksite.

Clean and inspect in advance

Do not get started with the painting task unless you have inspected the roof on your own. You can make use of an extension ladder to reach the most difficult areas on the roof. You can get started by performing the cleaning task. If possible you can begin with the cleaning task.

It is better to check for minor and major damages on the roof. It is important to inspect the shingles as well. Mark the areas that are damaged and shingles that need to be replaced.

Repair damages before painting

Painting tasks are not possible to perform unless you have repaired the damages. The areas that you marked should be repaired. All tiles and shingles that are broken or damaged should immediately be replaced.

In case you are unable to perform this task on your own, it is best to contact an expert roof repairing and painting services. There may be tasks that may not be easy to handle as DIY exercises.

Treat debris and molds

Before you paint it is important to get rid of the debris and molds. You cannot expect quality unless the debris has been removed. You can make use of a pressure wash system to clean the debris and molds. Do not use high-pressure type devices.

You may have to select the best nozzle type that will not damage the shingles and tiles. It should only clean the roof.

Use the solution to kill moss

Moss can be present on the roof tiles. You can prepare a quality solution to treat moss. You can make use of bleaching powder mixed with water. The solution will help in treating the moss for longer periods. It is important to keep rinsing the moss for at least ten to fifteen minutes.

Once done, you may have to allow the tile to dry out naturally. Do not leave any bleach powder residues behind. It may not be easy to treat with paint.

Now you can get started with the painting task. You need to ensure that the paint quality is appropriate for the roof. It should be waterproof paint. You can make use of a spray painting kit for performing the painting task. This will give an even coating.